Product Overview — Part 450122
The 450122 is a precision-manufactured Engine Cushion / Rubber Mount component for demanding industrial and heavy equipment applications. Anti-vibration engine mount for Hitachi excavators and construction cranes. Part 450122 provides effective isolation across a wide dynamic load range.
Part 450122 is specified for Hitachi medium-large excavators and construction cranes where the engine mounting system must manage both steady-state torque reaction and transient shock loads during bucket impact and slewing. The compound uses a proprietary SBR/NR blend that provides excellent creep resistance under sustained static loads while maintaining sufficient dynamic compliance for vibration isolation. Field data from US and Australian operators confirms a 5,000 operating hour service interval under normal maintenance conditions.
Browse related products: 1524771, 6129902, 1487116, 8A31-54-1110 for complete engine cushion system maintenance solutions.
Technical Specifications
| Property | Value | Standard |
|---|---|---|
| Part Number | 450122 | OEM Specification |
| Hardness | 60 ± 5 Shore A | ISO 48-4 / ASTM D2240 |
| Tensile Strength | ≥ 18 MPa | ISO 37 / ASTM D412 |
| Elongation at Break | ≥ 350% | ISO 37 / ASTM D412 |
| Compression Set | ≤ 25% (22h/70°C) | ISO 815-1 / ASTM D395 |
| Temperature Range | −40°C to +100°C | Operational limits |
| Ozone Resistance | No cracking 168 h | ISO 1431-1 |
| Fire Safety | EN 45545-2 HL2/HL3 avail. | EN 45545-2:2013 |
| Fatigue Life | >1,500,000 cycles | Dynamic fatigue test |
| Bond Strength | ≥ Bulk rubber tear | ISO 813 |
Applications & Compatibility
Hitachi excavators ZX400, ZX450, ZX470; Hitachi cranes KH series; Hitachi construction equipment requiring high-capacity engine isolation.
Our engineering team can confirm compatibility for other equipment types not listed above. Contact us with the make, model, year, and serial number for precise cross-reference verification before ordering.
Material & Quality Standards
- Base Polymer: Natural Rubber (NR) or NR/SBR blend — outstanding resilience and low heat buildup
- Reinforcing Fillers: High-structure carbon black for controlled stiffness and abrasion resistance
- Protection Additives: Anti-ozonant wax and chemical antioxidant system for extended outdoor service life
- Bonding System: Chemically bonded rubber-to-metal interface with bond strength exceeding bulk rubber tear strength
- EN 45545-2 Option: Halogen-free flame retardant meeting smoke toxicity requirements for railway-grade applications
All production batches manufactured under ISO 9001:2015 QMS with full material traceability from raw compound to finished product. Certificates of conformance and material test reports supplied on request.
Installation & Maintenance
- Verify on arrival: Confirm part number 450122. Inspect for transit damage or surface defects — reject any non-conforming item.
- Prepare mating surfaces: Remove all rust, old rubber residue, grease, and loose paint. Flatness tolerance within 0.5 mm for proper seating.
- Correct orientation: Follow the assembly drawing or OEM workshop manual. Incorrect orientation causes premature failure and may void warranty.
- Torque fasteners: Use a calibrated torque wrench with a cross-pattern tightening sequence to the OEM-specified value.
- Post-installation check: Inspect for correct seating and gap clearance. Run equipment at idle to confirm absence of abnormal noise or vibration.
Recommended replacement interval: 3,000–5,000 operating hours or at first sign of cracking, permanent deformation exceeding 3 mm, or detachment of rubber from metal insert.